Whether you’re managing a commercial bank branch in Lagos, or running a big POS center in Abuja, or anywhere in Nigeria, a faulty counting machine can lead to counting delays, long customer queues, and counting errors unless you repair your counting machine.
Understandably, basic dust cleaning can fix minor issues, more advance faults like worn rollers, misaligned sensors and power issues do need expert technical intervention.
In this guide, we’ll look at the common causes of note counting machine break down, how you can fix a faulty counting machine in house and when you should call a professional.
Common Counting Machine Problems in Nigerian Business Places
If you’re handling mixed polymer and paper Naira notes, combined with dust, humidity, and voltage fluctuations, these things place heavy demand on banknote counters.
Below are the most frequent faults businesses experience and how to handle them:
Miscounting or notes skipping:
This is usually caused by dust build up on optical sensors or worn-out friction rollers.
To fix miscounting or note skipping in house, blow dust off machine sensors, using a dry air blower. You can also have a technician replace worn out rubber feed and friction rollers.
Rejecting real Naira notes:
For machine with fake money sensors, if your counting machine rejects original Naira notes, this might be due to dirty or uncalibrated UV, MG or IR counterfeit sensors.
To fix this in house, wipe the sensors gently with a dry microfiber cloth to remove the dirt or dust. Alternatively, a technician can recalibrate sensitivity for Naira or other specific denomination, based on the currency you count.
Frequent Note Jams:
Frequent note jams is one of the most common counting machine repair issues. It is often times caused by folded, torn, damp, or taped notes. It can sometimes be equally caused by dirt collected in the feed path.
To fix frequent jams in house, unplug the machine, clear jammed notes, and fan stacks before counting.
You can also get a counting machine repairs technician to adjust hopper gap tension or clear internal obstructions.
Grinding Noise or Sluggish feed:
Sometimes a counting machine an develop an annoying grinding noise that obviously shows something is wrong somewhere.
This is most likely caused by stripped internal gears, snapped drive belts, or motor wear.
To fix this, you’ll need a counting machine repair technician. The technician will open the unit to replace worn drive belts, gears, or motor parts.
Unit refusing to Power On:
When a counting machine refuses to power on or displays a blank screen, that might be as a result of a blown fuse, faulty power cable, or voltage surge damage to the board.
To repair this in house, ensure the wall socket and power cable are turned on.

If that is turned on an you’re still experiencing the blank screen, you might need to reach a professional technician who will check the machine to replace blown internal fuses, repair the main circuit board or fix any other issue that could be faulty.
Quick Troubleshooting Steps Before Booking a Counting Machine Repair
Before you reach out to a counting machine repairs technician, run through these safe basic checks to rule out simple operational issues you can resolve inhouse:
- Power Off and Unplug First: Always switch off your machine and disconnect it from power before inspecting the hopper, rollers, or sensors.
- Prepare Your Cash Properly: Remove staples, pins, rubber bands, and heavily taped or crumpled bills. Fan the stack of Naira notes before placing them in the hopper so the notes don’t stick together from moisture or static.
- Clear Surface Dust: Use a soft, dry brush or compressed air to clear lint and paper dust from the hopper and stacker sensors. Avoid pouring liquid cleaners or harsh chemicals directly onto optical sensors.
- Verify Your Power Supply: If the screen flickers or the unit restarts mid-count, test it on a stabilized socket or UPS. Power fluctuations are a major cause of circuit board failure in busy shops and offices.
When to Call a Counting Machine Repairs Technician
Opening a currency counter without proper calibration tools often knocks the counterfeit detection sensors out of alignment.
You want to schedule professional Note Counting Machine Repair & Servicing if:
- The machine shows persistent error codes (such as UV, MG, IR, or motor errors) after basic cleaning.
- Rubber feed rollers look smooth, shiny, or cracked, causing notes to slip or double-feed.
- The counter fails to detect known counterfeit notes or consistently rejects clean, genuine Naira bills.
- Internal belts have snapped, or the machine emits a burning smell or loud grinding noise.
Machines and Brands We Supply, Repair & Maintain
For over 15 years, SGI Global Enterprises Limited has supported more than 1,000 clients across 37+ cities in Nigeria and West Africa with reliable office and banking equipment.
Our technicians handle diagnostics, quality spare parts replacement, sensor calibration, and servicing across major models, including:
- Glory Note Counting Machines (including Glory GFB-800N and Glory Brandt 8762)
- Zenith Bill Counters and desktop UV/MG counting machines
- Multi-Currency Sorter Machines
- Fake Money Detectors
- Time Stamping Machines (including Widmer and Digital Time Stamp Machines) and Checkwriter Machines.
Would you rather prefer a machine upgrade over counting machine repairs?
Read our guide on How to Choose the Best Money Counting Machine in Nigeria or explore our full range of Office Equipment Repair & Maintenance Services.
Why Routine Maintenance Protects Your Business
Waiting for a counting machine to break down completely can lead to emergency repair costs and avoidable downtime.
Instead of doing that, consider setting up a scheduled servicing plan, especially for banks, microfinance institutions, supermarkets, churches, and schools.
Doing that can get you the following benefits:
- Reduced Machine Downtime: Technicians clean internal optics, service moving parts, and replace worn rubbers before they fail during peak business hours.
- Reliable Counterfeit Detection: Periodic recalibration keeps UV, MG, and IR sensors tuned to security features on Naira notes, helping you identify fake Naira notes before they enter your cash drawer.
- Longer Equipment Lifespan: Routine maintenance can extend the working life of commercial-grade machines, helping you enjoy maximum value from your equipment investment.
Frequently Asked Questions (FAQs)
How often should a money counting machine be serviced?
For high-volume cash environments like banks, supermarkets, and busy POS centers, professional servicing every 3 to 6 months is recommended. Offices and retail shops with moderate cash flow should schedule maintenance at least once a year.
Do you offer on-site repairs and nationwide support?
Yes. Routine servicing, sensor calibration, and roller replacements can be carried out promptly to keep your operations moving, and we provide technical support, repairs, and delivery across Lagos and nationwide.
Is it better to repair or replace a faulty counting machine?
For commercial-grade machines like Glory GFB-800N or Glory Brandt models, replacing worn rollers, belts, or sensors is relatively more cost-effective than purchasing a new machine unless you really need an upgrade. Our technicians inspect your unit and recommend the most practical, cost-efficient solution.
Final Words
Do not let a jamming or miscounting machine slow down your business operations. Get Reliable Counting Machine Repair & Servicing Today
If you need urgent repairs, genuine replacement parts, or routine maintenance for your office and banking machines, SGI Global Enterprises Limited is ready to help.
Contact us with your machine model and fault description for fast technical support here.
Let’s hear from you. What is your go to checklists for counting machine repairs? Drop your comments below.